buckling load

There are two failure modes of the thin film, one is the bifurcation and fracture under the tension load, and another is buckling and delamination under the compression.

薄膜的破坏形式有两种，一种是在拉伸状态下的分叉和断裂，另一种是在压缩载荷情况下的屈曲和脱粘。

According to nonlinear finite element analysis, the ultimate load-carrying capacity of tensegrity system is discussed based on the buckling of struts.

本文根据非线性有限元理论研究讨论基于压杆失稳的张拉整体结构极限承载能力。

After deboned, the faceplates occurred the permanent bending deformation and elastic buckling in the vertical main direction of compression load, and the foam core happened the shear failure and permanent plastic deformation.

上下面板和泡沫夹芯脱胶分离后，面板主要垂直于压缩载荷的方向发生弹性屈曲和永久的弯曲变形，泡沫夹芯在冲击损伤的附近发生剪切失效和永久的塑性变形。

Furthermore , the larger diameter of case rear aperture is, the greater critical buckling load is.

壳体后开口直径越大, 临界屈曲载荷越大.

A rational method is presented for calculating the ultimate strength of the pressure hull plate and the buckling load of the tank shell.

提出了液舱区耐压船体壳板极限承载能力及波舱壳板失稳压力的计算方法。

Analysis the development of test equipment of testing buckling column's critical load based on the definition of the compressive column's stability

基于压杆失稳定义的稳定试验装置研制过程

The critical buckling load is influenced by the pattern of bottom-hole assembly directly.

下部钻具组合的具体方式将直接影响其所能承受临界失稳载荷的大小.

The prosperous post buckling load capacity of web plates of box girders can be used.

焊接箱形梁腹板存在较高的屈曲后强度,可供利用.